The SikaTack®-Panel material set is an economical adhesive fastening system for panels in ventilated facades, enabling fastening without the use of mechanical anchoring. The system consists of the SikaTack®-Panel elastic adhesive, the SikaTack®-Panel double-sided fastening and spacer tape and auxiliary materials. The SikaTack®-Panel system enables invisible and non-invasive connection of the facade panel to the substrate.
facade
Application
Invisible, non-invasive panel mounting system for ventilated facades used outdoors and/or indoors: ♦ Commercial and residential buildings ♦ New and existing buildings ♦ Can be used for interior finishing works
facade
Properties
♦ Single-component products, ready to use♦ Fast, economical gluing system♦ Uniform stresses on the entire surface of the panels (no point stresses)♦ High durability and resistance to weather conditions♦ Fastening system absorbs movements and vibrations♦ Allows for the introduction of creative solutions in facade design♦ Aesthetic, easy-to-maintain surface finish♦ The system does not contain silicones
facade
Tests
facade
facade
Approvals Test Report
ITB Technical Approval No. AT-15-8111/2009: Set of products for fastening facade cladding panels SikaTack® Panel System, Warsaw 2009 Approval of “Deutsche Institut für Bautechnik” Berlin, Reg. No.: Z-10.8-408Note: Panels intended for application must be previously checked and their suitability for façade use must be confirmed.
facade
facade
facade
SikaTack®-Panel Adhesive
facade
Product description
SikaTack®-Panel Adhesive
facade
Application
One-component adhesive for SikaTack®-Panel kit
facade
Product data
facade
facade
Character
facade
facade
Color
Ivory
facade
Packaging
310ml cartridges, 12 cartridges per box 600ml ‘sausage’ cartridges, 20 packs per box
facade
Storage
facade
facade
Storage conditions/Shelf life
Best used within 9 months from the production date. Store in appropriate conditions, in factory-sealed, undamaged packaging, in dry conditions, at temperatures of +10°C and +25°C. Protect from direct sunlight.
facade
Technical data
facade
facade
Chemical base
Single-component polyurethane, cross-linking under the influence of moisture
facade
Density
1,18kg/l DIN 53 479
facade
Skinning time
20 min. (w. +23° C / 50% wilg. wzgl.)
facade
Curing speed
4 mm / 24h (w +23° C / 50% wilg. wzgl.)
facade
Operating temperature
-40°C do +90°C
facade
building material classification
B2 DIN 4102, part 1
facade
Mechanical properties
facade
facade
Shear strength
~ 2,0 MPa
facade
Tensile strength
~ 2,50 MPa
facade
System Information
facade
facade
Application Terms
facade
facade
Ambient temperature
Minimum +5°C / Maksimum +35°C
SikaTack® – products for preparing panels before installation
facade
SikaTack® – products for preparing panels before installation
facade
Application
Materials for cleaning and adhesion optimization.
facade
Product data
facade
facade
Character
Sika® Cleaner-205 SikaTack®-Panel Primer
facade
Color
Colorless Black
facade
Packaging
1000 ml 1000 ml250 ml
facade
Storage
Sika® Cleaner-205 SikaTack®-Panel Primer
facade
Storage conditions / Shelf life
Best used within 12 and 9 months from the production date, respectively. Store in appropriate conditions, in factory-sealed, undamaged packaging, in dry conditions at a temperature of +10°C to +25°C.
facade
Technical data
Sika® Cleaner-205 SikaTack®-Panel Primer
facade
Chemical base
Alcohol solution Pigmented, solvent based activator EP resin
facade
Density
0,8kg/l 1 kg/l
facade
Flash-point
+14°C -4°C
facade
System Information
facade
facade
Application Terms
facade
facade
Ambient temperature
Minimum +5°C / Maksimum +35°C
SikaTack®-Panel Fixing Tape
facade
SikaTack®-Panel Fixing Tape
facade
Application
Double-sided, self-adhesive, spacer and fixing tape used for initial fixing of the façade panel (until the elastic adhesive has cured). The tape also ensures a uniform 3 mm thickness of the SikaTack®-Panel adhesive joint.
facade
Character
facade
facade
Color
Anthracite
facade
Packaging
33m roll
facade
Storage conditions / Shelf life
Best used within 24 months of production date. Store in appropriate conditions, in factory-sealed, undamaged packaging, in dry conditions at temperatures between +10°C and +25°C. Protect from direct sunlight.
facade
Technical data
facade
facade
Chemical base
Closed-cell polyethylene foam
facade
Density
0,064 kg/l DIN 51 757
facade
Dimensions
3,3 mm (+ 0.2 mm) x 12 mm
facade
Operating temperature
-40°C do +70°C
facade
Mechanical properties
facade
facade
Shear strength
> 150 godzin (1 kg / 25 x 25 mm) FTM 2
facade
Tensile strength
MD 25 N / 15 mm, CD 20 N / 15 mm DIN 53 455
facade
Peel strength
> 23 N/ 25 mm (180°C – 30 min.) on stainless steel FTM 1
> 23 N/ 25 mm (180°C – 30 min.) na stali nierdzewnej FTM 1
facade
Limitations
The long-term strength is ensured by the SikaTack-Panel adhesive. The mechanical strength of the SikaTack-Panel tape should not be included in the calculation. The SikaTack-Panel tape should be used over the entire length of the panel-to-substrate connection.
facade
System Information
facade
facade
Application Terms
facade
facade
Ambient temperature
Minimum +10°C / Maksimum +35°C
System Information
System structure
Aluminium substrate The substrate must be approved by the relevant inspection institutions (L, T, H shapes or equivalent). The material must contain at least AIMgSi alloy 0.5 F 22 according to DIN 1748-1.Wooden substrate Perpendicular spruce or pine battens, flat, smooth, with a maximum moisture content of < 14% according to DIN 1052. The bonding surface must be clean, free of any coatings and dust. The gaps between the battens must be at least 1 cm.Design and dimensions The dimensions of the perpendicular surface depend on the façade construction. The gaps between the substrate battens and their width depend on the type of panel and the required loads. Each project requires individual solutions and a description of the details. ExamplesRequired width of substrate strips for the SikaTack®-Panel fastening system. System structureThe facade panel must be connected along its entire height. Calculation of maximum values due to permissible load:- Adhesive width: 10 mm- Tensile strength: 0.15 MPa- Shear strength: 0.12 MPa (permissible reduction factor S = 1.0) Working jointsIn order to design and dimension the system correctly, and to ensure a proper vertical connection on an aluminium or wooden substrate, all standard building regulations and provisions for façade works must be taken into account. In order to ensure optimum fastening of the façade panels, all vertical aluminium or wooden battens must be uniform, even and parallel. Gaps and joints in the substrate must not be connected by fasteners. Adequate gaps must be maintained between the panels to allow for movement due to thermal expansion of the material. The linear thermal expansion of the panels and the substrate must be taken into account. In order to ensure adequate ventilation of the entire façade system, adequately sized ventilation openings must be included at the top and bottom of the façade. Note: The design solutions must take into account all details and detailed descriptions of the SikaTack-Panel system.
Application details
facade
Material consumption
MaterialApplicationConsumption SikaTack®-Panel Cartridge 310ml Packaging 600ml Triangular adhesive bead 8 x 10 mm ~ 44 ml / m, refers to 7 m / cartridge or 13 m / packaging 600 ml Sika® Cleaner-205 250 ml bottle 1000 ml bottle Width 50 mm ~ 3.5 ml / m, refers to ~ 71m / 250 ml bottle to ~ 285m / 1000 ml bottle SikaTack®-Panel Primer 1000 ml bottle Width 50 mm ~ 8 ml / m, refers to ~ 125m / 1000 ml bottle SikaTack®-Panel Fixing Tape, roll 33m 1 m / m
facade
Ground conditions
The substrate must be clean and dry, homogeneous, even, free of grease, oil, lubricants, dust, loose particles, remnants of old coatings, cement laitance, etc. and other elements that may reduce adhesion. Standard construction requirements must be observed.
facade
Application Terms
facade
facade
Substrate temperature
Within 5 hours after mounting the system, the ambient temperature should not fall below +5°C.
facade
Ambient temperature
Minimum +5°C / Maksimum +35°C
facade
Material temperature
The temperature of building materials (panels, subfloor, etc.) must be at least 3°C above the dew point.
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookies
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
3rd Party Cookies
This website uses Google Analytics to collect anonymous information such as the number of visitors to the site, and the most popular pages.
Keeping this cookie enabled helps us to improve our website.
Please enable Strictly Necessary Cookies first so that we can save your preferences!
Additional Cookies
This website uses the following additional cookies:
(List the cookies that you are using on the website here.)
Please enable Strictly Necessary Cookies first so that we can save your preferences!
Required width of substrate strips for the SikaTack®-Panel fastening system. System structureThe facade panel must be connected along its entire height. Calculation of maximum values due to permissible load:- Adhesive width: 10 mm- Tensile strength: 0.15 MPa- Shear strength: 0.12 MPa (permissible reduction factor S = 1.0) Working jointsIn order to design and dimension the system correctly, and to ensure a proper vertical connection on an aluminium or wooden substrate, all standard building regulations and provisions for façade works must be taken into account. In order to ensure optimum fastening of the façade panels, all vertical aluminium or wooden battens must be uniform, even and parallel. Gaps and joints in the substrate must not be connected by fasteners. Adequate gaps must be maintained between the panels to allow for movement due to thermal expansion of the material. The linear thermal expansion of the panels and the substrate must be taken into account. In order to ensure adequate ventilation of the entire façade system, adequately sized ventilation openings must be included at the top and bottom of the façade. Note: The design solutions must take into account all details and detailed descriptions of the SikaTack-Panel system.
